Readers ask: When I Turn The Key In My Car Nothing Happens?

When I turn the key there is no sound?

If there is no sound when you turn the key, but the lights and accessories work, it could be the stater relay or starter solenoid. However if there is no sound at all, not even a click, it’s probably your battery.

Why won’t my car crank when I turn the key?

If you turn the key and can hear the starter motor trying to turn the engine over, the lack of power is likely caused by electrical issues such as a weak battery, dirty battery terminals or a worn starter motor. If you’re still not having any joy, it may be a problem with the battery terminals.

Why is my car not doing anything when I try to start it?

If your vehicle won’t start, it’s usually caused by a dying or dead battery, loose or corroded connection cables, a bad alternator or an issue with the starter. It can be hard to determine if you’re dealing with a battery or an alternator problem.

You might be interested:  Readers ask: Where Can I Make A Car Key Copy?

What are the signs of a bad ignition switch?

Signs Of A Faulty Ignition Switch

  • Car Won’t Start. If you turn your key and the car attempts to start, but fails, then you might have a broken ignition switch.
  • Key Won’t Turn.
  • Car Stalls.
  • No Noise From The Starter.
  • Dashboard Lights Flicker.

Why won’t my car start but my radio works?

If the lights and/or the radio come on but the car does not start, you may also have dirty or corroded battery terminals. The terminals are what connect the electrical system to the battery. If you can get the car started by jumping it, it’s a good bet that your battery was the problem.

How do you tell if it’s your starter or ignition switch?

Test the Starter It is under the hood, usually on the passenger side at the bottom of the motor next to the transmission. The ignition switch is a set of electrical contacts that activates the starter and usually is located on the steering column.

How do you tell if its your starter or your battery?

Last, Check The Starter The battery sends a burst of energy to the start which uses this energy to turn the engine over and get it car started. If you put the key in the ignition, but only hear a click when you turn the key, you’ve got a problem with your starter.

What causes no crank no start?

If the fuel pump, fuel injector, or fuel filter is damaged, this can cause the no crank/no start condition. If the filter is clogged, the fuel going into the engine will be impeded. The last thing that could be faulty with the fuel system is the fuel supply line.

You might be interested:  Readers ask: How To Get Key Out Switch Of 99Ford Esort Zx2 Manuel Car?

How can you tell if the ignition switch is bad?

Put the ignition key into the ignition switch and crank the engine. If the engine cranks, then your ignition switch is obviously working fine. If the engine does not crank, and you hear a “click” when you first turn the key to the “III” position, then your ignition switch is not the problem.

What causes ignition switch failure?

Worn ignition switch contacts, temperature problems, or broken springs can all cause the ignition switch to fail, preventing you from starting your car. On the road, poor ignition switch contacts could shut the engine off while driving, which could be dangerous.

How do you start a car with a bad ignition switch?

Find the solenoid and connect it to the positive terminal of the battery. Unplug the ignition wiring from the solenoid. With the help of a screwdriver, connect the solenoid to the post where the ignition switch connects. This will activate the solenoid and the vehicle should startup.