Often asked: What Is Red Flashing Light On Icon With Car And Key On My Prius Dashboard?

What does flashing red car with key mean Toyota?

That’s a theft deterrent/engine immobilizer light. It flashes whenever the key is not in the ignition. It goes off whenever you stick a master key in the ignition.

What does the flashing red car symbol mean on dashboard?

Hello, This is an indicator for the security system. It lets you know the vehicle immobilizer is armed, and that the vehicle will not start without the proper key (yours). If you notice that the light is not flashing, you have an issue.

How do I get my car out of anti-theft mode?

Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.

Why is my security indicator light flashing?

If the Security Indicator Light is flashing with the key out of the ignition lock and accessory position, this is a normal sign that the alarm and the immobilizer system is active. While starting the car or key in the “run” position, the security lamp should illuminate briefly then go out.

You might be interested:  FAQ: How Much T=To Replace The Key On A Car?

What is the red car symbol on dashboard Nissan?

The illuminated red key sign with the ignition off informs the driver and passengers if the doors are locked. This light draws minimal current and will not drain the battery. The light is simply a normal communication function on the Nissan Serena.

Why is my Prius not turning on?

The most common causes that hinders normal starting operation of your Prius are dead key fob battery, dead high voltage battery, dead 12v battery, clogged fuel filter, blown fuse, empty gas tank, immobilizer error or any fault in the electrical system.

What do you do when your Prius won’t turn on?

The battery cables connected to your Prius, are perhaps not necessarily the most common reason that your Prius isn’t starting. But problematic battery cables are some of the easiest to diagnose and fix. To remedy this issue, you can take the battery poles and give them a thorough look.

How do I reset my Prius immobilizer?

When in the car, check the antitheft light to see if it is on; if on, it means the immobilizer is on. Use your key to turn on the car but not start the engine. The key should be in the position for 10-15 minutes, during which most of the car systems are running, which will also allow the antitheft system to reset.

How do I reset the security system on my car?

Cycle the key in the ignition from the “Off” position to the “On” position twice in a row. The alarm will emit a chirping sound after turning the ignition to the “On” position the second time. This will reset the alarm, making it ready for reprogramming (if necessary).

You might be interested:  Quick Answer: When I Turn Off My Car I Hear Long Sound Until I Remove The Key?

Is my car in anti-theft mode?

If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.

How do I permanently disable anti theft system?

Exit the car with all doors closed and the windows rolled up. Also close and any rear doors such as the trunk, rear hatch and front hood. Lock the car using the drivers side lock and walk away from the car at least ten feet. Wait for fifteen minutes and unlock the door, this should reset the security system.